Power Management

CT-60 Power Distribution Center

The CT-60 is a fully resettable power distribution center (PDC). For the automotive fleet market, especially emergency vehicles, the unit provides circuit protection for after market equipment from one location within the vehicle.

The CT-60’s circuit breakers are aircraft quality for reliability, easy to operate, and consist of a main breaker with six branch breakers. The 60 amp. main circuit breaker has service disconnect (Pull-Off, Push-On). This allows for complete control of the PDC from one button. Six branch breakers, having capacities from 10 to 20 amps., can be used independently or bussed together. All breakers in the CT-60 have an indicator band which quickly identifies which breaker has tripped. All breakers are TRIP FREE ie: holding the button down does NOT prevent the breaker from operating correctly.

Main lead-in protection is provided thru the use of a weatherproof 80 amp. manual reset circuit breaker. Two fused outputs can be used for any other equipment rated up to 12 amps each. All terminations are on two terminal strips at the rear of the CT-60. The CT-60 is fully enclosed for mounting in the passenger compartment or trunk of most vehicles.

The MNSTAR Responder Power Distribution Systems and wiring harness’s provide unique plug and play solutions for all in-car lighting, communication and law enforcement products while isolating emergency equipment from the vehicle’s factory electronics.   All products are easily expandable, upgradeable and provide uniformity in your fleet.

Next